Primer Cup Optical Inspection, Measurement & Sorting Machine

Inspection Capabilities

The system uses advanced machine vision inspection technology and automation.

• Outer Diameter

  Measures the outside diameter and identifies oversize/undersize parts.

• Overall Height

  Checks cup height for dimensional consistency.

• Inner Diameter

  Measures the internal opening where visible from the camera.

• Wall Thickness / Edge Profile

  Checks visible rim and wall geometry where optical access permits.

• Rim / Edge Condition

  Detects uneven, damaged, rolled, or deformed edges.

• Roundness

  Checks whether the cup remains circular rather than oval or distorted.

• Concentricity / Symmetry

  Checks alignment between relevant circular features.

• Surface Scratches

  Detects visible scratches and scoring marks.

• Dents / Dings

  Detects local deformation on the cup surface.

• Cracks / Splits

  Detects visible cracks, splits, or discontinuities.

• Wrinkles / Folds

  Detects material wrinkles or forming-related folds.

• Burrs

  Detects unwanted material projections around edges.

• Surface Marks / Stains

  Identifies abnormal marks, discoloration, or contamination.

• Deep Forming Defects

  Checks for abnormal deformation caused during forming.

• Bottom Profile

  Checks the visible bottom geometry for deformation or irregularity.

• Bottom Surface Defects

  Detects scratches, dents, pits, or other visible defects on the bottom.

• Foreign Material

  Detects visible particles or contamination.

• Presence / Orientation

  Confirms that the component is present and correctly oriented for inspection.

• OK / NG Sorting

  Automatically classifies components as Accepted (OK) or Rejected (NG) based on inspection results.